El directorio enciclopédico desde la Wikipedia.
In computing, tar (derived from tape archive) is both a file format (in the form of a type of archive bitstream) and the name of the program used to handle such files. The format was standardized by POSIX.1-1988 and later POSIX.1-2001. Initially developed as a raw format, used for tape backup and other sequential access devices for backup purposes, it is now commonly used to collate collections of files into one larger file, for distribution or archiving, while preserving file system information such as user and group permissions, dates, and directory structures.
[edit] Designtar's linear roots can still be seen in its ability to work on any data stream and its slow partial extraction performance, as it has to read through the whole archive to extract only the final file. A tar file ( As is common with Unix utilities, tar is a single specialist program. It follows the Unix philosophy in that it can "do only one thing" (archive), "but do it well". tar is most commonly used in tandem with an external compression utility, since it has no built-in data compression facilities. These compression utilities generally only compress a single file, hence the pairing with tar, which can produce a single file from many files. To ease this common usage, the BSD and GNU versions of tar support the command line options [edit] Format detailsA tar file is the concatenation of one or more files. Each file is preceded by a header block. The file data is written unaltered except that its length is rounded up to a multiple of 512 bytes and the extra space is zero filled. The end of an archive is marked by at least two consecutive zero-filled blocks. A limitation of early tape drives was that data could only be written to them in 512 byte blocks[citation needed]. As a result data in tar files is arranged in 512 byte blocks. The tar command can write data to tape in chunks of several 512 byte blocks, to minimize the wasted gaps in the tape between write operations. Each chunk is called a record. The user can specify a blocking factor, which is the number of blocks per record. The end of an archive gets padded with additional blocks of zeros to make its total size equal a multiple of records, regardless of whether tape is used as the storage medium. [edit] File headerThe file header block contains metadata about a file. To ensure portability across different architectures with different byte orderings, the information in the header block is encoded in ASCII. Thus if all the files in an archive are text files, then the archive is essentially an ASCII file. The fields defined by the original Unix tar format are listed in the table below. When a field is unused it is zero filled. The header is padded with zero bytes to make it up to a 512 byte block.
A directory is also indicated by having a trailing slash (/) in the name. For historical reasons numerical values are encoded in as ASCII text octal numbers, with leading zeroes. The final character is either a null or a space. Thus although there are 12 bytes reserved for storing the file size, only 11 octal digits can be stored. This gives a maximum file size of 8 gigabytes on archived files. To overcome this limitation some versions of tar, including the GNU implementation, support an extension in which the file size is encoded in binary. Additionally, versions of GNU tar from 1999 and before pad the values with whitespace characters instead of zero characters. The checksum is calculated by taking the sum of the byte values of the header block with the eight checksum bytes taken to be ascii spaces (value 32). It is stored as a six digit octal number with leading zeroes followed by a null and then a space. Various implementations do not adhere to this, so relying on the first white space trimmed six digits for checksum yields better compatibility. [edit] Command examples
Some simple examples of using the Tar program. [edit] To create a GNU Tar fileCreates a GZIP-compressed Tar file named
[edit] To create a GNU TGZ fileCreates a GZIP-compressed Tar file named
[edit] To list files in a compressed Tar file
[edit] To list files in a compressed TGZ file
[edit] To extract files from a Tar fileExtracts all files from a compressed Tar file named
Extracts to a specific folder:
Other versions of Tar may require the -z option to specify the compression type. [edit] To extract files from a TGZ file(s)Extracts all files from a compressed .tgz file named
Extracts single file
[edit] UStar formatMost modern tar programs read and write archives in the new UStar (Uniform Standard Tape Archive) format, which has an extended header definition as defined by the POSIX (IEEE P1003.1) standards group. Older tar programs will ignore the extra information, while newer programs will test for the presence of the "ustar" string to determine if the new format is in use. The UStar format allows for longer file names and stores extra information about each file.
[edit] ExampleThe example below shows the ASCII dump of a header block from a tar file created using the GNU tar program. It was dumped with the od program. The "ustar" magic string followed by two spaces can be seen, meaning that the tar file is in GNU format, partially incompatible with the true UStar standard (in POSIX.1-1988), which has the signature "ustar" followed by a NUL character.[4] 0000000 e t c / p a s s w d nul nul nul nul nul nul 0000020 nul nul nul nul nul nul nul nul nul nul nul nul nul nul nul nul * 0000140 nul nul nul nul 0 1 0 0 6 4 4 nul 0 0 0 0 0000160 0 0 0 nul 0 0 0 0 0 0 0 nul 0 0 0 0 0000200 0 0 4 1 3 5 5 nul 1 0 1 5 5 0 6 1 0000220 1 0 5 nul 0 1 1 5 5 6 nul sp 0 nul nul nul 0000240 nul nul nul nul nul nul nul nul nul nul nul nul nul nul nul nul * 0000400 nul u s t a r sp sp nul r o o t nul nul nul 0000420 nul nul nul nul nul nul nul nul nul nul nul nul nul nul nul nul 0000440 nul nul nul nul nul nul nul nul nul r o o t nul nul nul 0000460 nul nul nul nul nul nul nul nul nul nul nul nul nul nul nul nul * 0001000 [edit] Naming of tar archive filesLike most Unix utilities, tar doesn't require any particular filename suffix in order to recognize a file as an archive. Conventionally, uncompressed tar archive files have names ending in ".tar". If an archive is compressed with an external tool, the compression program adds its own suffix as usual, resulting in filename endings like ".tar.Z", ".tar.gz", and ".tar.bz2". Names like those can't exist on MS-DOS due to its 8.3 filename limitations, so a second set of conventions appeared for storing compressed tar archives on an MS-DOS file system:
These shortened filename suffixes are still in common use. [edit] tarbombsNot to be confused with decompression bomb.
tarbomb is derogatory hacker slang used to refer to a tarball containing files that extract to the working directory instead of into a separate directory of their own (such a separate directory ideally being a subdirectory of the working directory). This will sometimes create problems by overwriting files of the same name in the working directory. It is almost always an inconvenience to the user, who is obliged to identify and delete a number of files scattered throughout the directory's contents. Such behavior is considered bad etiquette on the part of the archive's creator. A related problem is the use of absolute paths when creating tarballs. Files extracted from such tarballs will often be created in unknown locations outside the working directory, and like a tarbomb have the potential to overwrite existing files. On the other hand, an attempt to extract files to a location for which the current user does not have write access will fail. A user can avoid both of these problems by issuing the command
This variant of the tar command will not extract any files, but will display the paths of all files that would be created by the extraction process. The user thus has the opportunity to create a container directory for the tarball's contents, and to assess the contents of any absolute paths, before carrying out the extraction. [edit] tarpipeA tarpipe is the process of creating a tar archive in stdout and then, in another directory, extracting the tar file from the piped stdin. This is a useful way to copy directories and subdirectories, especially if the directories contain special files, such as symlinks, and character or block devices.
[edit] Remote tarpipeA remote tarpipe or ssh tarpipe uses the same methodology of a tarpipe, but instead of simply changing to a new directory on the local host to extract the tar, the user logs into a remote host in order to execute the tar extraction.
To reverse the process, download instead of upload, the user logs into a remote host in order to create the archive, the tar extraction takes place on the local host.
[edit] tarpittarpit is a term to describe a method of revision control where a tar is used to capture the state of development of a software module at a particular point in time. The use of a tarpit typically loosely mirrors the use of a revision control software tag and branching through the use of descriptive names. [edit] See also[edit] Notes
[edit] External links
Directorio de Enlaces Directorio dmoz Directorio espejo dmoz Pedro Bernardo | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
